Connect-Tek Over IP
19
B. Configuring your CTIP-01
The Admin/Setup Screen
This is the menu that will allow you to access all the features you will need to perform an initial configuration
of the
CTIP-01
. Each of the options is explained as following:
I. How to Setup the IP Address for your CTIP-01
As you get the Admin/Setup screen, please click on
Network Configuration (IP address. Netmask, etc).
Dynamic Host Configuration Protocol (DHCP)
Automatic network configuration using DHCP is:
Enabled/Disabled.
This feature applies only to the
LAN
port on the rear panel, and is enabled by default. When enabled, the unit
will automatically configure itself with an IP address when a
DHCP server
is present. When disabled, the
LAN
port will use the values assigned to it on the
IP Addresses and Routing
table below.
Current DHCP Lease Information
This box provides detailed information about the IP lease that the unit has obtained from the
DHCP
server
.
