ConMet | 5701 SE Columbia Way, Vancouver, WA 98661 | 800.547.9473 | conmet.com
1. If the rotor mounting studs were removed from the hub during disassembly,
apply Loctite® 272 to the coarse end of the double- ended stud and to the rotor
mounting threads in the hub. (If Loctite® 272 is not available, use Loctite® 262.)
Install and torque the rotor studs to 65 ft-lbs. for iron hubs and 50 ft-lbs. for
aluminum hubs.
2. Clean all mating surfaces.
3. Place the stainless steel insulator (for aluminum hubs only) and the rotor on the
hub.
4. Install and torque the new, included rotor mounting nuts in a star pattern to
200 ft-lbs.
5. Place the ABS tone ring on the rotor.
6. Install and torque the new, included 1/4-20 UNF button head screws in a star
pattern to 160 in-lbs.
Service Kit Part Number 10041218
ConMet R-Drive Flat Rotor 10034621
Rotor Minimum Thickness 1.46" (37 mm)
ConMet 10034621 Flat Rotor
1. Hub Assembly (not included)
2. Stainless Steel Insulator (not included, for aluminum hubs only)
3. 10034621 Flat Rotor
4. 5/8"-18 UNF Flanged Hex Head Nut (10 ea.)
5. ABS Tone Ring
6. 1/4-20 UNF Torx Button Head Screws (5 ea.)
SEE CONMET SERVICE MANUAL FOR DETAILED
HUB SERVICE INFORMATION.
Clean all component mating
surfaces before reassembly.
1/4-20 UNF button head screws. Torque
to 160 in-lbs in a star pattern.
Part No. 10085400A
10-2021 Printed in the USA
5/8-18 UNF flanged hex head nuts.
Torque to 200 ft-lbs in a star pattern.
DO NOT THROW AWAY
STAINLESS STEEL
INSULATOR
DISC BRAKE ROTOR REPLACEMENT
Install the brake rotor using only the hardware provided in the kit.
If present, retain stainless steel insulator (see image below).
NOTE
Failure to follow the stated instructions can jeopardize the rotor attachment
and potentially lead to failure of the rotor and/or damage to the wheel hub.
WARNING
59
ConMet
