ConMet | 5701 SE Columbia Way, Vancouver, WA 98661, USA | 800.547.9473 | conmet.com
Part No. 10085396B
10-2021 Printed in the USA
DISC BRAKE ROTOR REPLACEMENT
Install the brake rotor using only the hardware provided in the kit.
1. Clean the rotor mounting surfaces and position the rotor onto the hub.
2. Using the new fasteners included in the kit, thread in all 10 cap screws with a
washer on each. Torque
in a star pattern
to 140 ft-lbs.
Note: Two different lengths of rotor bolts are included in this kit.
Make sure to use the same length bolt to attach the new rotor as was
removed from the hub assembly.
Service Kit Part Number 10030921
ConMet Hat-Shaped Rotor 10003830
Rotor Minimum Thickness 1.32” (33.5 mm)
ConMet 10003830 Hat-Shaped Rotor
1. Hub Assembly (not included)
2. 10003830 Hat-Shaped Rotor
3. 9/16”-12 x 2.25” Rotor Cap Screw (10 Ea.)*
9/16”-12 x 1.5” Rotor Cap Screw (10 Ea.)*
*Use same length as was removed from original assembly.
SEE CONMET SERVICE MANUAL FOR
DETAILED HUB SERVICE INFORMATION
Clean all component mating
surfaces before reassembly
NOTE
Failure to follow the stated instructions can jeopardize the rotor attachment
and potentially lead to failure of the rotor and/or damage to the wheel hub.
WARNING
9/16”-12 UNC rotor cap screw.
Torque in a star pattern to 140 ft-lbs.
1
2
3
62
ConMet
