ConMet | 5701 SE Columbia Way, Vancouver, WA 98661, USA | 800.547.9473 | conmet.com
Part No. 10086064B
10-2021 Printed in the USA
DISC BRAKE ROTOR REPLACEMENT
Install the brake rotor using only the hardware provided in the kit.
1. Clean the rotor mounting surfaces and position the rotor onto the hub.
2. Using the new fasteners included in the kit, thread in all 10 cap screws with a
washer on each. Torque
in a star pattern
to 220 ft-lbs.
Service Kit Part Number 10086065
ConMet U-Shaped Rotor 10082120
Rotor Minimum Thickness 1.46” (37.0 mm)
ConMet 10082120 U-Shaped Rotor
1. Hub Assembly (not included)
2. 10082120 U-Shaped Rotor
3. 5/8” -18 UNF x 2.99” Hex Head SEMS Cap Screws (10 ea.)
SEE CONMET SERVICE MANUAL FOR
DETAILED HUB SERVICE INFORMATION
Clean all component mating
surfaces before reassembly
NOTE
Failure to follow the stated instructions can jeopardize the rotor attachment
and potentially lead to failure of the rotor and/or damage to the wheel hub.
WARNING
Torque in a star pattern to 220 ft-lbs.
1
2
3
66
ConMet