PreSet Plus
®
Hub
Assemblies
For instructions on installing ConMet's
PreSet Plus hub assemblies (see
figure 19), refer to the PreSet hub
assembly reinstallation instructions
in section 6.
17
PreSet Plus Hub Assembly
FIGURE 19
Conventional Hubs
For instructions on installing ConMet’s
Conventional hub (see figure 17),
refer to the Conventional reinstallation
instructions in section 4.
15
PreSet Plus Hub Assembly
FIGURE 19
PreSet
®
Hub Assemblies
For instructions on installing
ConMet’s PreSet hub assemblies
(see figure 18), refer to the PreSet
hub reinstallation instructions in
section 5.
16
PreSet Hub Assembly
FIGURE 18
5
ConMet
3. Identification (continued)
14
106827a
BARREL OF HUB
Barrel of Hub
FIGURE 16
Final Hub Assembly Number
This number is stamped on one of
the following:
-
Mounting flange face (see
figure 13)
-
Diameter of the mounting
flange (see figure 14)
-
Back side of the mounting
flange (see figure 15)
The final hub assembly number
identifies the hub assembly,
hub machining, studs, bearings,
spacer, seal and ABS ring.
Julian Date
The casting, machining, and the
final assembly have Julian dates
stamped into the hub assembly in
the same location as the assembly
numbers (see figures 13, 14, 15
and 16). A Julian date appears as
the day of the year plus the last
two digits of the calendar year
(e.g., July 4 2008 would appear as
18508). This number provides the
date when the hub was machined
and assembled at the factory
and may be used for warranty
purposes.
