INSTALLATION GUIDE
11/9/12
3DHD VISION SYSTEM
4
MARKETING COMMUNICATIONS
Figure 4
Figure 5
Figure 6
Attach the Mounting Bracket to the Sony Monitor Power Supply as shown in
Figure 4.
a. Remove backing from the double sided tape on the Mounting Bracket.
b. Position the Mounting Bracket so the slotted hole is to the left and the double
sided tape is facing up.
c. Position the Power Supply feet facing up with the cord to the Sony* Monitor
facing you.
d. Attach the Mounting Bracket to the Power Supply approximately on center and
press firmly together.
Place the Mounting Bracket & Power Supply under the middle shelf of the Video Cart
as shown in
Figure 5.
a. Standing in front of the Video Cart, place the right side of the Mounting Bracket
& Power Supply under the right side of the 2
nd
shelf with the cord to the Sony*
Monitor facing you.
b. Fold the Mounting Bracket & Power Supply up so it is flat up against the bottom
of the Video Cart shelf. The Mounting Bracket & Power Supply should be
loosely in position, Do no force into place.
Secure the Mounting Bracket & Power Supply to the middle shelf of the Video Cart as
shown in
Figure 6.
a. Slide the Mounting Bracket & Power Supply forward until the slotted hole in the
Mounting Bracket is aligned with the mounting hole in the shelf of the Video
Cart.
b. Insert the mounting hardware included with the Mounting Bracket and slide the
Mounting Bracket & Power Supply to the front of the Video Cart until it is snug,
and secure the mounting hardware hand tight.
Sony is a registered trademark of the Sony Corporation of America.
