11
GSM Scout Serie
Softwareversion 37
Fig.3
•
Deactivation of the LED (switch off):
If the user likes to deactivate the LED (e.g. to save energy or to avoid that
the device will be recognised in a dark room) the two jumper have to be
taken out („A“ and „B“ in Fig.3). By putting in the jumper LED- function is
activated again.
Please note the following hints regarding the function of the device:
Dependant from the GSM- provider it may happen that the trans-
mission of SMS is delayed. Normally SME are transmitted within
a few seconds.
Running the system in a GSM- network cost will cause costs. If
wrong phone numbers are used it may happen that high costs
are resulting. ConiuGo® GmbH is not liable for such costs cau-
sed by faults in configuration. It is recommended to test care-
fully the correct function and programming of the device.
6. Configuration by using the phonebook
The phone numbers to which the GSM Scout will send the SMS are read from the
phonebook of the SIM- card. Please make the necessary configuration of those
phonebook entries as follows: