Copyright
©
2014
congatec
AG
TA30m16
68/95
10.4.1
Watchdog Submenu
Feature
Options
Description
POST Watchdog
Disabled
30sec
1min
2min
5min
10min
30min
Set the timeout value for the POST watchdog. The watchdog is only active during the
system POST and provides a facility to prevent errors during boot up by performing a
reset.
Stop Watchdog for User Interaction
No
Yes
Select whether the POST watchdog should be stopped during the popup of the boot
selection menu or while waiting for the setup password.
Runtime Watchdog
Disabled
One-time Trigger
Single Event
Repeated Event
Select the operating mode of the runtime watchdog:
‘One-time Trigger’ - Disables watchdog after the first trigger.
‘Single Event’ - Executes every stage once before the watchdog is disabled.
‘Repeated Event’ - Executes the last stage repeatedly until reset.
Note:
This watchdog will be initialized just before the operating system starts booting.
Delay
Disabled
10sec
30sec
1min
2min
5min
10min
30min
The runtime watchdog is delayed for the selected time.
Note:
Use this feature to ensure that the operating system has enough time to load.
Event 1
ACPI Event
Reset
Power Button
Select the type of event that is generated when timeout 1 is reached.
Event 2
Disabled
ACPI Event
Reset
Power Button
Select the type of event that is generated when timeout 2 is reached.
Event 3
Disabled
ACPI Event
Reset
Power Button
Select the type of event that is generated when timeout 3 is reached.
