Conel CLEAR DOS, Operating Instructions Manual

Page: 38 / 112

38
CONTENTS
CONTENTS 38
FOREWORD 41
1 ABOUT THESE OPERATING INSTRUCTIONS 42
2 SYMBOLS AND UNITS USED 43
3 GENERAL 44
3.1 APPLICATION 44
3.2 SCOPE OF SUPPLY 44
3.3 TEST MARKS 45
4 SAFETY 45
4.1 INTENDED USE 45
4.2 LABELLING OBLIGATION ACCORDING TO THE DRINKING WATER ORDINANCE 46
4.3 MATERIALS USED
46
4.4 DANGERS DUE TO NON-OBSERVATION 46
4.5 WATER PRESSURE 47
4.6 ELECTRIAL DEVICES/EQUIPMENT 47
5 INSTALLATION 48
5.1 GENERAL 48
5.2 REQUIREMENTS FOR THE PLACE OF INSTALLATION 48
5.3 PLACE OF INSTALLATION 49
5.4 POWER SUPPLY 49
5.5 INSTALLATION OF THE BUILT-IN ROTARY FLANGE 50
5.6 INSTALLATION OF THE DOSING PUMP WITHOUT A BYPASS VALVE 50
5.7 INSTALLATION OF THE BYPASS VALVE (ACCESSORY) 52
5.8 DOSING PUMP INSTALLATION ON THE ALREADY INSTALLED BYPASS VALVE 53
5.9 INSTALLATION OF THE DOSING TUBE 54
6 OPERATION 55
6.1 BLEEDING 55
6.2 COMMISSIONING 55
6.3 CONTROL PANEL 56
6.4 MENU FUNCTIONS 57
6.5 FUNCTION DESCRIPTION 58
6.6 MINERAL SOLUTION SELECTION CRITERIA 59
6.7 EXCHANGE OF THE MINERAL SOLUTION CONTAINER 60
6.8 MENU STRUCTURE 60
6.9 CONNECTION OF A LAN CABLE 61
6.10 CONVERSIONS/CHANGES/SPARE PARTS 61
6.11 SERVICE/REPAIR 61
6.12 OPERATING INTERRUPTION 61
6.13 OVERVIEW OF DISPLAY MESSAGES 62
7 FAULT 63
8 MAINTENANCE 63
8.1 CLEANING 63