43
13.
PREPARE CABLE FOR MICRO DUCT
1. Install optional cable tips onto end of fiber to be installed (Figure 84).
2. Feed cable through counter rollers and tractor drive belts. Reinstall cable guides
(Figure 85).
3. Choose the correct cable seals and install on cable. Cone side of cable seal faces
conduit. Place cable seals into venturi grooves, split side down (Figure 86).
4. Close air block cover. Tighten nuts securely, but do not over-tighten. Use cross
tightening procesure to completely secure (Figure 87).
Figure 84. Install Cable Tip
Figure 85. Feed Cable through
Rollers
Figure 86. Feed Cable through
Seals and into Conduit
Figure 87. Close Air Block Cover
Summary of Contents for Gulfstream 350e
