Condux Gulfstream 350e, User'S Manual & Safety Manual

Page: 15 / 52

15
18. Select Home. You should be back at this screen. (Figure 17)
19. Select off to turn recording on. This is what you should see (Figure 17)
20. Start Blowing
21. While blowing you can monitor each parameter by touching the name.
Example: Speed, Air Block, Clamp Force, Push Force.
Or monitor all by selecting the middle graph button (Figure 18)
22. When finished blowing hit P, then hit Cable, enter the Cable Mark END.
Then go to home and hit OFF to stop recording. Hit P and note the ID for
reference to the report information (Figure 19).
Figure 17. Main Screen & Begin
Recording
Figure 19. E Recording
ID Reference
Figure 18. Monitor Parameters