Condux Gulfstream 350e, User'S Manual & Safety Manual

Page: 29 / 52

29
Figure 48. Lower Belts
13. Repeat crash test until fiber doesn't slip and max force is achieved.
A. If fiber slips, pull back and increase the clamp force (Figure 49).
B. If fiber comes off the belt drive or folds past mark at back end, decrease the motor
force (Figure 50).
C. If fiber stops and you are satisfied, mark down both the motor psi (or Bar) and
clamp force psi (or Bar). Do not exceed these pressures during your install, as fiber
integrity will be compromised.
14. Proceed to Pressure Test.
Figure 49. Clamp Force Regulator
Figure 50. Motor Speed Regulator