Conductix-Wampfler Jay Electronique Jump, Installation And User Technical Manual

Page: 66 / 81

- 66 -
Jump - 332970E_A005
04/03/21
FR EN
8 - Option switch RF VUB095
8.1- Description
This option ensures a continuous radio link in a congested RF environment (reflection,
shadow areas ...) by controlling an RF switch to transmit radio waves from two separate
antennas.
The VUB095 RF switch is controlled by the JUMP in accordance with the number of
configured frames (cf §4.2.6).
Ex: If the number of repeated frames is set to 6, the operating cycle will be as follows:
1. The JUMP will listen for 100ms on antenna1
2. The JUMP will retransmit for 100ms on antenna1
3. The JUMP will listen for 100ms on antenna2
4. The JUMP will retransmit for 100ms on antenna2
IMPORTANT: The maximum length of the cables connecting the JUMP repeater and the
RF switch must not exceed 30m.
8.2- Wiring
A B
LD1
LD5
CHARGE
ERROR
CONFIG
ERROR
CONFIGURATION
TENS UNITS
LD2
LD3
LD4
J5
Antenna n°1
Module for increasing
radio coverage
VUB095
JUMP
Antenna n°2
COM RF1 RF2