Conductix-Wampfler Jay Electronique Jump, Installation And User Technical Manual

Page: 57 / 81

Jump - 332970E_A005
04/03/21
- 57 -
FR EN
4.2.6- Configuration of the number of frames repeated
The Jump repeater can be configured for different repeat cycle.
The duration of a radio frame is 16ms. The number of frames must be
adjusted in according to the system reactivity and the robustness of
the radio link.
The number of radio frames is adjusted using the DIPswitch
« configuration » and cursor No. 6 and 7.
A
B
LD1
LD5
CHARGE
ERROR
CONFIG
ERROR
CONFIGURATION
TENS UNITS
LD2
LD3
LD4
1
ON
2 3 4 5 6 7 8
CONFIGURATION
Jump
(version «batterie» représentée)
Position «ON»
Position «OFF»
Cursor position table :
Cursor
nb. 6
Cursor
nb. 7
Number of frames repeated delay caused
ON ON 4 64 ms
OFF ON 10 160ms
ON OFF 8 128 ms
OFF OFF 6 100 ms (defautl)
Attention : Attention :
For the For the 920MHz 920MHz range - range - channels from 16 to 31 channels from 16 to 31 - the number of repeated frames is - the number of repeated frames is
fixed at fixed at 33 regardless of the position of cusrors 6 and 7. regardless of the position of cusrors 6 and 7.