Conductix-Wampfler Jay Electronique Jump, Installation And User Technical Manual

Page: 74 / 81

- 74 -
Jump - 332970E_A005
04/03/21
18 - Residual risks
17 - Environmental data
19 - Foreseeable misuse
20 - Waste recycling and management
The product being an element of the equipment, a risk analysis of the concerned
application will allow to estimate these residual risks.
Polarity inversions of the radio repeater Jump power supply : no starting up
of product.
Other misuse of the radio repeater Jump : see Troubleshooting paragraph.
When the unit has reached the end of its service life, be sure to
dispose of it appropriately. The unit can be disposed of in a specific
waste collection centre as organised by the local authorities, or it can
be turned over to a distributor who will handle proper disposal of the
unit.
Electronic waste sorting will prevent possible negative impact on the
environment resulting from inappropriate elimination of electronic
waste and will allow proper processing and recycling of the materials
forming the unit, representing significant savings in terms of energy
and resources
Tightness : product fulfils following standard: NF EN 60529
The altitude does not significantly affect the characteristics of the secure active
repeater Jump up to 2000 m. At higher altitudes, it is necessary to take into
account the reduction of the dielectric strength and the cooling effect of the air
(EN 60947-5-1).
The relative humidity must not exceed 80% for a temperature of +31 ° C max.
A higher relative humidity is possible at lower temperatures (eg 90% to 20 ° C).
The JUMP have to be protected of weather, U.V. and frost.
NOTICE : This product has been designed for environment A.
May cause unwanted electromagnetic disturbances in which case the user may
be required to take adequate mitigation measures.
Repeater JUMP lifetime: 20 years