Installation Manual
Spring Cable Reel
BEF150 – BEF500
MAL6100-0001a-EN
www.conductix.com
translated document
Page 17 of 54
6.2
Packing
The individual packaged parts must be packed according to the transport conditions to be expected. Only environmentally friendly
materials have been used for packaging.
The packaging must protect the individual components from transport damages, corrosion, and other damage until installation.
Do not destroy the packaging and remove it only just before installation.
Handling packaging materials:
Dispose of packaging material according to valid legal regulations and local guidelines.
CAUTION!
Environmental damage due to improper disposal!
Packaging material is a valuable resource and can be reused, processed or recycled in many
cases.
→
Dispose of packaging materials in an environmentally appropriate manner
→
Comply with locally applicable disposal guidelines; if necessary, engage a specialist with
disposal
6.3
Storage of packed parts
Store packed parts under the following conditions:
Do not store outdoors
Store in a dry, dust-free place
Do not expose to aggressive media
Protect from direct sunlight
Avoid mechanical vibrations
Storage temperature: 15-35 °C
Relative humidity: max. 60 %
When storing for more than 3 months, check the general condition of all parts and the packaging at regular intervals. If
necessary, add or replace the preservative
CAUTION!
Under some circumstances, there may be instructions for storage on the packed parts which
go beyond the requirements listed here.
→
Follow them appropriately