Installation Manual
Spring Cable Reel
BEF150 – BEF500
MAL6100-0001a-EN
www.conductix.com
translated document
Page 10 of 54
2.3
Intended use
The spring cable reel is used for the transmission of power and data to mobile consumers with automatic winding using a coil
spring. Unwinding is not carried out manually, but rather by the mobile consumer.
Both the reel and the cable are permanently installed.
Flexible reel-capable energy or control cables are used.
The spring cable reel must always be mounted with its axis horizontal.
2.4
Improper use
Improper use is any use other than those listed in 2.3.
Use for any purpose other than or in addition to the intended use is permitted only after discussion with the manufacturer.
2.5
Protective measures to be taken by the operator / user
The spring cable reel is used in commercial/industrial areas. The operator of the spring cable reel is therefore subject to legal
regulations concerning workplace safety. In addition to the safety instructions in this manual, all valid safety, accident protection
and environmental protection regulations applicable for the place of operation of the spring cable reel apply.
This particularly includes:
The operator must be informed of applicable workplace safety regulations and carry out a risk assessment to detect additional
dangers resulting from the specific working conditions in the place of operation of the spring cable reel. This must be
implemented in the form of operating instructions for the operation of the spring cable reel.
For the entire period of use of the spring cable reel, the operator must check whether the operating instructions prepared
correspond to the current state of regulations, and update the operating instructions as needed.
The operator must clearly regulate and determine responsibilities for installation, operation, troubleshooting, and maintenance.
The operator must ensure that all employees involved with the spring cable reel have read and understood this manual. The
operator must furthermore train personnel at regular intervals and inform them of hazards.
The operator must provide personnel with all required safety gear.
The operator is furthermore responsible for ensuring that the spring cable reel is always in a technically trouble-free condition. The
following thus applies:
The operator must ensure that the service intervals described in this manual are observed.
The operator must regularly have all safety systems inspected for functionality and completeness (once yearly if possible, but
at least as often as required by applicable national regulations).
If the device or system has been modified, the safety systems must be inspected again and adapted to the changed
conditions in such a way that the device or system is safe again.