47
PDV 7160
EN
8. Prior to installation to the board, secure the appliance’s bottom perimeter using a watertight seal supplied
according to the type).
9. Remove
10. Position the unit onto the edge of the worktop and pass the power cord through the opening so that the plug or
terminals remain accessible after installation.
11. Press the unit carefully into place. Be careful not to squeeze the power cord.
12. Connect the gas supply pipe or hose to the appliance (refer to the Gas supply connection).
13. Attach the unit to the cabinet by screwing 4 screws to the bottom of the worktop.
14. Connect the power cord to the wall outlet or terminal box (refer to Connecting to the mains).
Removal
To uninstall the unit, it is important to proceed correctly:
1. First, unplug the power cord from the mains (pull out the plug or switch off the circuit breaker).
2. Shut-off the gas valve.
3. Remove the attachment screws.
4. Remove the appliance and carefully disconnect the gas supply as well as the power cord.
Fig. 10a
Fig. 10b
TROUBLESHOOTING
Problem
Cause
Solution
The piezo-electric ignitors of all
burners do not operate.
Power cord is improperly connected
or power has failed.
Check the connection and electricity.
