Concept2 MN3360ss, Manual, Page: 164 / 168

Note:
• The left side of the basket cannot be completely removed. You can only remove the right side.
POSITIONING OF THE CUTLERY BASKET
1. position – Set the left side of the basket
to the lower position, the left side is flat,
right side is skewed.
2. position –Lift the left side of the basket upwards,
both sides of the baskets are flat.
3. position – Move the right side of the basket
from right to left, baskets are overlapping.
4. position –Remove the right side, left side will
remain flat.