Concept2 MN3360ss, Manual, Page: 155 / 168

155
EN
MN3360ss / MN3360wh
INSTALLATION OF THE APPLIANCE
Caution!
Risk of electric shock! Before installation, disconnect the power cord from the wall outlet. Otherwise there is a risk of
death or electric shock.
Built-in dishwashers installed as a free-standing appliance must be secured against overturning. They must be for
example screwed to the wall or placed under a worktop which is screwed to adjacent cabinets.
For safe operation the dishwasher must be installed by a qualified professional. Figures for the inflow and outflow
of water and electrical grid parameters must match with the figures listed in the technical specifications or in the
installation instructions.
• Defects caused by improper installation are not covered by the warranty.
• Installation is the responsibility of the customer not the manufacturer.
• The manufacturer bears no responsibility for damage caused to people, animals or property due to incorrect
installation.
• The dishwasher should be placed near the wall outlet, water supply and waste.
Adjusting door spring strength
• The spring strength is preset only for the appliance door itself. After attaching the cover plate the weight of the
door changes.
• You adjust the strength of the springs using the screws located on the bottom part of the front of the dishwasher
(Fig. 15).
• Setting of the springs is correct when the open door stays in the position and does not fall down.
Fig. 15