Concept2 MN3360ss, Manual, Page: 153 / 168

153
EN
MN3360ss / MN3360wh
Cleaning the spray arms
It is necessary to clean the spray arms regularly. Calcium and dirt may block nozzles and bearings of the spray arms.
• Check the outlet nozzle of the spray arms whether they are blocked by food residues or not.
• If it is necessary, unscrew and remove the spray arms (Fig. 11). Wash them under running water and then place
them back.
• To dismantle the upper arm, hold the nut, turn the arm clockwise and remove it.
• To dismantle the lower arm, remove the arm by lifting it upwards.
• Wash each spray arm in warm soapy water. To clean the nozzles use a fine brush.
• Install the arms back after cleaning.
CAUTION!
One of the most common malfunctions is clogged spray arms. The filter is not properly inserted. Make sure the filter
system is locked properly after cleaning!
Properly secured filter Poorly secured filter Poorly secured filter