Fig. 7
SERVICE
Replacing a bulb
To illuminate the interior of the appliance, a
halogen
bulb of high thermal
resistance is used (25–40 W/220–240 V, T300 °C).
To remove the bulb proceed as follows:
1. Disconnect the appliance from the power supply, or switch off the appropriate
circuit breaker.
2. Unscrew the glass cover in the anti-clockwise direction according to Fig. 7
and replace the bulb with a bulb of the same type and parameters.
3. When installing a new bulb, use a rag or paper wipe to hold the bulb.
4. Re-install the glass cover.
PROTECTION OF THE ENVIRONMENT
• Packaging materials and obsolete appliances should be recycled.
• The transport box may be disposed of as sorted waste.
• Polyethylene bags should be handed over for recycling.
Appliance end-of-service-life recycling:
This appliance is marked in compliance with Directive 2012/19/EU of the European
Parliament and of the Council on waste electrical and electronic equipment (WEEE).
A symbol on the product or its packaging indicates that this product should not go into
household waste. It must be taken to the collection point of an electric and electronic
equipment recycling facility. By making sure this product is disposed of properly, you will help
prevent the negative effects on the environment and human health that would otherwise
result from inappropriate disposal of this product. Disposal must be done according to the
waste management regulations. You can learn more about recycling this product from your
local authorities, a household waste disposal service or in the shop where you bought this
product.
104
EN
ETV8960bc
