Cleaning glass parts
If the door glass needs cleaning, follow the instructions below:
1. Open the oven door to the maximum possible position.
2. Press the right and left sides of the cover on the „buttons“ and remove the cover outwards
3. When removing, lift and then pull the glass towards you. If you lift the glass too high, some plastic parts
of the upper plastic cover may break.
4. After cleaning, re-insert the glass in the reverse order of removal.
5. The glass must be correctly positioned in the cut-outs
in the upper plastic cover.
6. After placing the glass, replace the top cover and snap it into place.
Caution!
Be careful when manipulating the door during cleaning. The hinges are designed to the weight of all 3 glass
panes. If you remove one or both of the glass panes, the weight of the door is reduced and it can get closed
unintentionally, which can lead to damage of the glass panes.
Note:
1. For cleaning the glass panes, use a soft sponge and anti-grease detergent and then rinse them under
running water. Never wash the glass panes in a dishwasher!
2. The middle glass is fitted with rubber pads at the corners. When removing, be careful not to lose them.
These rubber pads prevent unpleasant vibrations when the fan function is turned on.
Handrail
Front view
Shield
Shield
101
EN
ETV8960bc
