IP CAMERA QUICK START GUIDE
6. Caution
Safety Precautions
1. Carefully read all instructions and warnings prior to using this device.
2. Installation should be made by qualified service personnel and should adhere to all local
codes.
3. Do not install this device near water or in excessively humid conditions.
4. Do not install this device near any heat sources such as radiators or stoves.
5. Do not install this device near flammable substances such as gas or oil.
6. Do not install this device in environments with unstable lighting conditions. Severe lighting
changes or flickering can cause the camera to malfunction.
7. Do not install this device in environments where it is directly facing a strong light source.
8. Do not install this device near devices which emit a strong electro-magnetic field.
9. Do not install this device on a surface subjected to frequent vibration or shocks.
10. Do not operate this device beyond its specified temperature, humidity, and power
source rating ranges.
11. Do not disassemble the camera.
12. Should any damage or suspected occur, shutdown the power source, unplug the
camera, and contact your service provider. Do not attempt to repair the device.
13. Ensure the UTP cable is not stepped on or twisted. Use the appropriate Ethernet cable
and wiring best practices for the installation environment.
14. Unplug the power source from the device during installation or maintenance.
15. Ensure proper grounding techniques are used when installing the device in areas with
voltage fluctuations or frequent lightning strikes.
16. Only use a dry cloth for cleaning.
17. Unplug the device when it is unused for long periods of time.
18. Only use accessories or attachments specified by the manufacturer.
CAUTION
PLEASE FOLLOW THE ABOVE PRECAUTIONS – FAILURE TO DO SO MAY INVALIDATE THE
WARRANTY OR CAUSE SERIOUS INJURY.
Note: Changes or modifications not expressly approved by the manufacturer can cause the
camera to be damaged and become inoperable. This may invalidate the user warranty.
Summary of Contents for CVP5325DNIR-IP2M/2.8
Page 12: ......
