background image

6

7

3.  Precautions for safe use

Follow the instructions in this manual very carefully when selecting the power level 
during each session with the Lumilisse Hair Remover.

Selecting an inappropriate power level may cause side eff ects. 

For detailed instructions on selecting the power, see the section 5.2 “Skin Color Sensor 
System – automatic detection of intensity level.”

Avoid side eff ects!

  Do not use a second pulse on the same patch of skin!
  If burns or blisters appear, STOP IMMEDIATELY!

Avoid complications after using the Lumilisse Hair Remover!

  Avoid exposure to sunlight and other sources of UV light, such as tanning beds.
   

“Exposure to sunlight” means continuous exposure to direct sunlight without 
protection for about 15 minutes or continuous exposure to indirect sunlight without 
protection for an hour.

Precautions for safe use prior to and during treatment

   Avoid exposure to the sun for 4 weeks prior to a treatment with the Lumilisse Hair 

Remover and again for 2 weeks following the treatment.

   Appropriate protection, like clothing that off ers suffi

  cient coverage or a sunscreen 

(with a protection factor higher than 50), should be used regularly 3 weeks before and 
after the treatment.

   Caution: It is important that you follow these instructions the same way if you are 

getting exposure to UV tanning light on a sun bed.

   If you have applied a self-tanning cream to your skin, wait until the cream’s tanning 

eff ect has disappeared completely before using your appliance.

   Always shave the area to be treated (except the face), and make sure you have clean, 

dry skin before using the Lumilisse Hair Remover. Do not use other methods of 
depilation, such as an epilator or wax.

   Make sure birthmarks and tattoos are covered during the Lumilisse Hair Remover 

treatment and also cover brown or black marks, as well as freckles, nevus (skin tags), 
warts or growths before using the Lumilisse Hair Remover. Dark skin or dark spots on 

your skin may absorb too much light which can injure the skin. Cover the area with a 
material that will not absorb the light, such as white medical tape.

   Never look directly into the light emitted by the fl ash lamp. If the light refl ected off  

your skin is uncomfortably bright, you may use sunglasses while using the device, 
provided they are not too dark to allow you to see where you are placing the device 
on your skin.

   Never use the Lumilisse Hair Remover on the tip of the breasts or the genital organs 

(male or female).

   Never use the Lumilisse Hair Remover on any part of the body where you might later 

want hair.

   Never use the Lumilisse Hair Remover on nose or ear hair.
   Never use the Lumilisse Hair Remover for anything but depilation.
   Never point the application surface of the Lumilisse Hair Remover to emit a light pulse 

into open space. Always ensure you point the treatment surface of the device at the 
skin and make sure it is in full contact with your skin before releasing a pulse.

   Never use the Lumilisse Hair Remover on a material other than skin.
   Never use the Lumilisse Hair Remover in an environment where a spark could cause 

an explosion, such as near a gas leak.

   Caution: Surfaces are hot. Do not touch the lens or application window with your 

fi ngers. Also ensure you keep the application surface clean. See point 7.2 on cleaning 
and maintenance of your Lumilisse Hair Remover.

   Never use fl ammable liquids, like alcohol (including perfume, deodorant or any other 

preparation containing alcohol) or acetone on your skin before using the Lumilisse 
Hair Remover.

   Using your Lumilisse Hair Remover may cause a temporary change in pigmentation 

(see “Warnings” and “Possible Side Eff ects”).

   Keep the device out of the reach of children. Do not use the Lumilisse Hair Remover on 

children or allow children to use it. Serious injury could result. This is not a toy!

   Do not use in the shower or in a wet environment. 
   This device is not intended for use by people (adults and children) whose physical, 

sensory or mental capacities are reduced, or by persons who lack experience or 
knowledge, unless they are supervised or have been given instructions beforehand 
on the use of the appliance by a person responsible for their safety. 

   Only use the Lumilisse Hair Remover for what it was intended to do and following the 

instructions of this manual.

  Do not use the unit if it has fallen or if it appears to be damaged.

As with all electrical devices, some precautions are necessary to ensure your safety 
when you use the Lumilisse Hair Remover.

   The Lumilisse Hair Remover is an electrical device and should never come in contact 

with water.

   Do not store the Lumilisse Hair Remover in a place where it could drop or fall into a 

bath or washbasin or any other container with liquid in it. Do not put it in water or any 
other liquid. This could result in severe electric shock.

  Do not use your Lumilisse Hair Remover when taking a bath.
  Never use the Lumilisse Hair Remover if it is damp or wet.
  If the Lumilisse Hair Remover has fallen in water, 

do not reach in and grab it.

 

  Unplug the Lumilisse Hair Remover immediately if it has fallen into water.

NO SUN

NO CREAM

NO UV 

TANNING LIGHT

NO DRUGS

NO USE ABOVE 

CHEEKBONES

Keep the Lumilisse Hair Remover away from all 
sources of water!

   You have a pathology linked to photosensitivity, like porphyria, polymorphic eruption 

to light, solar urticaria, lupus, etc.

   You have a history of skin cancer or areas subject to dermal malignancies.
   You have been undergoing radiation or chemotherapy for the last 3 months.
   You suff er from any other condition your physician deems a risk for the treatment.

If you have any questions or concerns about the risks to you resulting from the 
use of the Lumilisse Hair Remover, consult your healthcare provider or your 
dermatologist prior to use.

ipl960f_18pg025882_ib_final.indd   6-7

ipl960f_18pg025882_ib_final.indd   6-7

3/13/18   8:12 AM

3/13/18   8:12 AM

Summary of Contents for Lumilisse IPL960F


















Reviews:

Related manuals for Lumilisse IPL960F