28
29
Guidance and manufacturer’s declaration
– electromagnetic immunity
The Lumilisse Hair Remover (IPL960F) is intended for use in the electromagnetic
environment specifi ed below. The customer or the user of the Lumilisse Hair
Remover (IPL960F) should assure that it is used in such an environment.
Immunity
test
IEC 60601
test level
Compliance
level
Electromagnetic environment
– guidance
Conducted RF
IEC 61000-4-6
Radiated RF
IEC 61000-4-3
3 V
0.15 MHz to
80 MHz
6 V in ISM
and amateur
radio bands
between 0.15
MHz and 80
MHz
10 V/m
80 MHz to 2.6
GHz
3 V
0.15 MHz to
80 MHz
6 V in ISM
and amateur
radio bands
between 0.15
MHz and 80
MHz
10 V/m
Portable and mobile RF
communications equipment
should be used no closer to any
part of the IPL960F, including
cables, than the recommended
separation distance calculated
from the equation applicable to
the frequency of the transmitter.
Recommended separation
distance
Where P is the maximum output
power rating of the transmitter
in watts (W) according to the
transmitter manufacturer, and d
is the recommended separation
distance in meters (m).
Field strengths from fi xed RF
transmitters, as determined by
an electromagnetic site survey,
a, should be less than the
compliance level in each
frequency range, b. Interference
may occur in the vicinity of
equipment marked with the
following symbol:
NOTE 1:
At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic
propagation is aff ected by absorption and refl ection from structures, objects
and people.
a Field strengths from fi xed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radios, amateur radios, AM and FM radio
broadcasts and TV broadcasts cannot be predicted theoretically with accuracy.
To assess the electromagnetic environment due to fi xed RF transmitters, an
electromagnetic site survey should be considered. If the measured fi eld strength
in the location in which the Lumilisse Hair Remover (IPL960F) is used exceeds
the applicable RF compliance level above, the Lumilisse Hair Remover (IPL960F)
should be observed to verify normal operation. If abnormal performance is
observed, additional measures may be necessary, such as reorienting or relocating
the Lumilisse Hair Remover (IPL960F).
b Over the frequency range 150 kHz to 80 MHz, fi eld strengths should be less
than 3 V/m.
Recommended separation distances between
portable and mobile RF communications equipment and the
Lumilisse Hair Remover (IPL960F)
The Lumilisse Hair Remover (IPL960F) is intended for use in an electromagnetic
environment in which radiated RF disturbances are controlled. The customer or
the user of the Lumilisse Hair Remover (IPL960F) can help prevent electromagnetic
interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the Lumilisse Hair Remover
(IPL960F) as recommended below, according to the maximum output power of the
communications equipment.
Rated
maximum
output power
of transmitter
(W)
Separation distance according to frequency
of transmitter
(m)
150 KHz to 80 MHz
80 MHz to 800 MHz
800 MHz to 2.6 GHz
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the
recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum
output power rating of the transmitter in watts (W) according to the transmitter
manufacturer.
NOTE 1:
At 80 MHz and 800 MHz, the separation distance for the higher
frequency range applies.
NOTE 2:
These guidelines may not apply in all situations. Electromagnetic
propagation is aff ected by absorption and refl ection from structures, objects
and people.
ipl960f_18pg025882_ib_final.indd 28-29
ipl960f_18pg025882_ib_final.indd 28-29
3/13/18 8:12 AM
3/13/18 8:12 AM
