Series 1 Portable Chillers, PLC Control
UGH017/0500
4-6
O
PERATION
V
IEWING
C
HILLER
S
TATUS
The Status screens are read-only screens. You cannot make
changes to these screens. To view the status screens:
Press the Status arrow on the Main screen.
The Status button does not
let you change the status,
only view it.
STATUS SETUP RUN ALM
Press arrow
Use the scroll arrows to scroll through the
status screens.
●
Water level -
displays the current status of the water
level. Screen displays Level Okay, or Level Low. If the
level is low, see
Filling the Chiller
, in the Installation sec-
tion.
●
Temperatures -
displays the To Process temperature
and the Setpoint temperature. Check that the temperatures
are the proper settings. To change the Setpoint tempera-
ture, go to
Changing the Setpoint Temperature,
in the
Operation section.
Temperature
45 F
Set Point
40 F
●
Percent chiller load -
shows the current percent of
chiller capacity being used. This percentage cannot be
changed manually. It is a read-only value. This value
changes as the chiller cycles.
Chiller % Loading
70 %
Water Level
Level Okay
1
2
