Comtrol InterChange VS 3000 Series, Installation And Configuration Manual

Page: 23 / 98

Configuring MultiProtocol Router (MPR) 23
Installing VS-Link (Novell)
VS3000 is reset and any calls in progress are terminated. The
force load option is executed once, when you exit vs3kcfg, and
you are asked to verify that you want to do the forced load.
Backup, nn min polling
: This server will check the VS3000 every
nn minutes, and if the VS3000 has been abandoned by its
primary server (for example, because the primary server is
down), the backup server will acquire, reset, reload, and
reconfigure the VS3000. You can assign more than one backup
server to a given VS3000, and each backup server can use a
different polling interval.
Optional Firmware
: Reserved for future use.
Service Profile ID 1
: The SPID number for the first B channel on Port
1. This number is supplied by your service provider.
Directory Number 1
: The Directory Number associated with this
SPID.
The remaining Service Profile IDs and Directory Numbers
follow in sequence for the B channels on the other VS ports.
Notes
: This optional field enables you to enter notes or comments.
Diagnostics : Enter Y to activate the VS3000 Diagnostics. (See the
following step.)
12. When you are finished entering configuration information, press
Esc
to exit this window.
If you left the Diagnostics field blank, skip to the next step.
If you entered any character in the Diagnostics field, the
Diagnostics option window is displayed:
Use the options in this window to enable or disable console logging
of VS3000 status and events.