DeviceMaster LT User Guide
: 2000586
Rev. B
Managing the DeviceMaster LT - 81
Loading Driver Configuration Files
Loading Driver
Configuration Files
You must have previously saved a driver configuration file before you can load a
configuration file.
The driver configuration file uploads in portions:
•
Device-level configuration parameters.
•
Port configuration parameters. You must upload each port's configuration
parameters separately.
Loading Device
Configuration
Use the following procedure to load the configuration file for device-level
information for your DeviceMaster LT.
1.
If necessary, open the
Comtrol Drivers Management Console
using one of these
methods:
•
Windows Control Panel;
go to your
Control Panel
and click on the
Comtrol Drivers Management Console
.
•
Shortcut
; located under
Start> Program Files> Comtrol> DeviceMaster LT>
Comtrol Drivers Management Console
.
2.
Depending on your operating system, you may need to click
Yes
to the
Do you
want to allow the following program to make changes to this computer?
User
Account Control message.
3.
In the left pane, highlight the DeviceMaster LT for which you want to load the
device-level settings from the configuration file.
4.
Click
Load Configuration
.
5.
Browse to the location of the configuration file that you want to load.
