DeviceMaster LT User Guide
: 2000586
Rev. B
Device Driver (NS-Link) Installation - 37
Configuring the NS-Link Driver for Windows
Comtrol proprietary MAC mode Ethernet driver protocol, both UDP and
MAC mode serial data transport features are disabled.
In addition to encrypting the data streams, it is possible to configure the
DeviceMaster LT so that only authorized client applications can connect using
SSL/TLS.
For this option to function, you must also
in the NS-
Link web page.
Note:
See the help system or the
DeviceMaster NS-Link User Guide for
if you need additional information on SSL and the
corresponding options.
7.
If you are using a server certificate, click the
Server Certificate
check box and
enter the name in the
Server Certificate
text box.
8.
If you are using a client certificate, click the drop list and browse to the
appropriate client certificate file.
9.
Configure the device properties:
a.
If desired, change the
User-Friendly Device Name
.
b.
Optionally, set a different
Keep Alive Timeout
period. You can set the
amount of time in seconds that this DeviceMaster LT waits until it closes
this connection and frees all the ports associated with it.
c.
Optionally, set the
TCP Timeout Multiplier
value.
d.
Optionally, click a different
Scan Rate (ms)
.
e.
Optionally, change the
Number of Devices to Load at Once
.
f.
If necessary, click
Do NOT Attempt to Load Firmware in Device
.
g.
Optionally, click
Verbose Event Log
if you want to log additional
DeviceMaster LT information into the event log.
h. After making your changes, click
Apply
if you have additional
configuration procedures or click
Ok
if you have completed configuring
your DeviceMaster LT.
Note:
You can refer to the help system if you need information about any of the
options or features.
10. Optionally, you can click the
Advanced
tab and verify that the
Device Status
message indicates that the DeviceMaster LT is active and
Ok
.
11. Go to the next subsection to configure COM port properties.
