49
Static LAN IPv6 Address Configuration
Heading
Description
Interface Address
(prefix length is
required):
Configure static LAN IPv6 address and subnet prefix
length
IPv6 LAN Applications
Heading
Description
Stateless
Use stateless configuration
Refresh Time (sec):
The information refresh time option specifies how long a
client should wait before refreshing information retrieved
from DHCPv6
Stateful
Use stateful configuration
Start interface ID:
Start of interface ID to be assigned to dhcpv6 client
End interface ID:
End of interface ID to be assigned to dhcpv6 client
Leased Time (hour):
Lease time for dhcpv6 client to use the assigned IP address
Static IP Lease List:
A maximum of 32 entries can be configured.
To add an entry, enter MAC address and Interface ID and then click
Apply/Save
.
To remove an entry, tick the corresponding checkbox in the Remove column and
then click the
Remove Entries
button, as shown below.
Summary of Contents for WR-6891u
