Comtrend Corporation WR-6891u, User Manual

Page: 35 / 81

34
5.1.1 WAN Service Setup
This screen allows for the configuration of WAN interfaces.
Click the
Add button to create a new connection. For connections on ATM or PTM or
ETH WAN interfaces see Appendix E - Connection Setup .
To
remove a connection, select its remove checkbox and click
Remove
.
Heading Description
Interface Name of the interface for WAN
Description Name of the WAN connection
Type Shows the connection type
Vlan8021p VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
VlanMuxId Shows 802.1Q VLAN ID
IGMP Shows Internet Group Management Protocol (IGMP) status
NAT Shows Network Address Translation (NAT) status
Firewall Shows the Security status
IPv6 Shows the WAN IPv6 address
MLD Shows Multicast Listener Discovery (MLD) status
Remove Select interfaces to remove
Edit Click the Edit button to make changes to the WAN interface.
To
remove a connection, select its remove checkbox and click Remove .
NOTE : ETH and ATM service connections cannot coexist. In Default Mode, up to
8 WAN connections can be configured; while VLAN Mux Connection Mode
supports up to 16 WAN connections.
NOTE: Up to 16 PVC profiles can be configured and saved in flash memory.
Also, ETH and PTM/ATM service connections cannot coexist.