Comtrend Corporation WR-6891u, User Manual

Page: 79 / 81

78
Field Description
Traffic Class Name Enter a name for the traffic class.
Rule Order Last is the only option.
Rule Status Disable or enable the rule.
Classification Criteria
Class Interface Select an interface: (i.e.LAN, WAN, local, ETH1, ETH2,
ETH3, wl0)
Ether Type Set the Ethernet type (e.g. IP, ARP, IPv6).
Source MAC Address A packet belongs to SET-1, if a binary-AND of its source
MAC address with the Source MAC Mask is equal to the
binary-AND of the Source MAC Mask and this field.
Source MAC Mask This is the mask used to decide how many bits are checked
in Source MAC Address.
Destination MAC
Address A packet belongs to SET-1 then the result that the
Destination MAC Address of its header binary-AND to the
Destination MAC Mask must equal to the result that this
field binary-AND to the Destination MAC Mask.
Destination MAC Mask This is the mask used to decide how many bits are checked
in Destination MAC Address.
Classification Results
Specify Class Queue Packets classified into a queue that exit through an
interface for which the queue is not specified to exist, will
instead egress to the default queue on the interface.
Specify Class Policer Packets classified into a policer will be marked based on
the conforming action of the policer
Mark Differentiated
Service Code Point The selected Code Point gives the corresponding priority to
packets that satisfy the rule.
Mark 802.1p Priority Select between 0-7.
Set Rate Limit The data transmission rate limit in kbps.