Comtrend Corporation CT-6382D User Manual Download Page 73

Page: 73 / 143

6.6 Routing

The Routing dialog box allows you to configure Default gateway, Static Route and
RIP.

Note:

This “ RIP ” option is not available for Bridge mode.

6.6.1 Default

Gateway

If ‘

Enable Automatic Assigned Default Gateway’

checkbox is selected, this IAD

will accept the first received default gateway assignment from one of the PPPoA,
PPPoE or MER/DHCP enabled PVC(s). If the checkbox is not selected, enter the static
default gateway AND/OR a WAN interface. Click 'Save/Apply' button to save it.

NOTE:

If changing the Automatic Assigned Default Gateway from unselected to

selected, You must reboot the IAD to get the automatic assigned default gateway.

Note

: This screenshot is based on PPPoE encapsulation.

Summary of Contents for CT-6382D
















































































































































Search results

Summary of Contents for CT-6382D

Reviews:

Related manuals for CT-6382D

Brands by name

Popular brands

Comtrend Corporation CT-6382D, User Manual

Search results

Summary of Contents for CT-6382D

Reviews:

Related manuals for CT-6382D

Brands by name

Popular brands