The user must configure the IP Address and the Subnet Mask. To use the DHCP
service on the LAN, select the
Enable DHCP server
checkbox, and enter the Start
IP addresses, the End IP address and DHCP lease time. This configures the IAD to
automatically assign IP addresses, default gateway address and DNS server
addresses to each of your PCs.
Note that the IAD’s default IP address is 192.168.1.1 and the default private
address range provided by DHCP server in the IAD is 192.168.1.2 through
192.168.1.254.
7. The WAN Setup-Summary screen presents the entire configuration summary.
Click
Save/Reboot
if the settings are correct. Click
Back
if you wish to modify the
settings.
8. The following screen will be displayed. To enable the wireless function, select the
box (by clicking on it) and input the SSID. Then, click
Next
.
50
Summary of Contents for CT-6382D
