3-3 Firewall
Apart from NAT, this router also provides a firewall function to block
malicious intruders from accessing your computers on the local network.
These functions include inbound attack prevention, and block outbound
traffics, like block URLs which have pre-defined keywords.
Follow the instructions below to enable or disable the firewall function:
Click the ‘Firewall’ menu on the left of the web management interface,
and the following will be displayed on your web browser:
Select ‘Enable’ or ‘Disable’ to enable or disable firewall function of this
router, then click the ‘Apply’ button, and the following will be displayed
on your web browser:
Click the ‘Continue’ button to go back to the previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
126