Note: In this mode, if you are informed by your
wireless ISP that the wireless settings of the
access point have changed, configure the router in
this page to match the settings.
SSID (2):
This is the name of the wireless network. Input the
SSID name that your ISP provided to you.
Site Survey (3):
Click the ‘Select Site Survey’ button, then a
“Wireless Site Survey Table” will pop up. It will list
all available access points nearby. Select the access
point designated by your wireless ISP in the table
and the router will join the wireless network
through this access point.
Encryption (4): If the access point enables wireless security, you have to
follow the same settings in order to access the
access point. Click to set security settings for this
connection (go to section ‘2-7-3 Wireless Security’
for detailed instructions).
After you complete all settings, click the ‘Apply’ (5) button and the
following will be displayed on your web browser:
60
