Delete (10):
Select a port forwarding mapping by clicking
the ‘Select’ box of the mapping, then click the
‘Delete’ button to remove the mapping. If there’s
no existing mapping, this button will be grayed out.
Delete All (11):
Delete all mappings that exist in the virtual server
table.
Reset (12):
Unselect all mappings.
After you complete all settings, click the ‘Apply’ (13) button and the
following will be displayed on your web browser:
Click the ‘Continue’ button to go back to the previous setup menu; to
continue on other setup procedures, or click the ‘Apply’ button to
reboot the router so the settings will take effect (wait for about 60
seconds while the router is rebooting).
If you want to reset all the settings in this page back to previously-saved
values, click the ‘Cancel’ button.
116
