LPOD-R Outdoor Amplifier / Block Up Converter
MN-LPODR
Ethernet Interface Operation
Revision 3
4–18
4.5.4
Status Pages
Use these pages to see the unit’s operational status, logged alarm and statistics
windows. Click
Summary
,
Status
,
MOP
,
Events
,
Statistics
, or
Trending Graphs
to
continue.
4.5.4.1
Status | Summary
This read-only page shows a summary of information about the LPOD-R unit and
its current operating state. Refresh the page to see the latest data.
Figure 4-11. Status | Summary Page
Summary (read only)
The
Summary Fault
message shows
OK
on a green background if no faults are
present. If a fault exists, the message changes to
FAULT
on a red background.
Should this occur, look at the logged faults and alarms on the
Status | Events
page.
Terminal Status Change
If
Terminal Status Change
shows
NO
, there have been no changes in the unit’s
configuration since the last time the
Terminal Status Change
status was cleared.
If
Terminal Status Change
shows
YES
, a status change had occured for one or
more of these reasons:
•
An operating parameter changed, (e.g., when a command changes an
operational value)
•
A fault condition occurs
•
A redundant switchover occurs