LPOD-R Outdoor Amplifier / Block Up Converter (BUC)
MN-LPODR
Firmware Update
Revision 3
3–4
3.2.1.2
LPOD-R Connections for Earlier PS 1 or PS 1.5 Units
If you are using a user-supplied terminal emulator program – you can use a user-
fabricated 9 pin-to-19 pin adapter cable to directly connect the PC serial port to
the LPOD-R PS 1 or PS 1.5 19-pin
‘J6 | COM1’
port.
Figure 3-2. M&C Utilities Available from Comtech EF Data (Earlier
LPOD-R PS1 or PS 1.5 Models)
See
Figure 3-2:
•
You can use Comtech EF Data’s optional CLC-10 Handheld Terminal (part
of CEFD M&C Accessory Kit KT-0020518) for serial-based monitor and
control of the LPOD-R PS 1 or PS 1.5 (when the optional EIA-232/485
serial interface is available).
This kit provides an adapter cable (CEFD P/N CA-0020526) to connect the
CLC-10 to the LPOD-R PS 1 or PS 1.5 19-pin
‘J6 | COM1’
port.
The CLC-10 is not supported for use with the current LPOD-R
production models.
