3.3 Programming steps
a. Press the “
SET
” button to go to the main screen.
b. Press the “
SET
” button again and hold it down and press the “
PROG
”
button, too. At this point the device gets into programming mode and the
abbreviations indicating the days of the week (
MON
TUE WED THU FRI
SAT SUN
) are flashing on the display.
c. Select the day to be programmed using the large
and
buttons
on the front panel of the device (
MON
indicating Monday,
TUE
indicating
Tuesday etc.). If you wish to create the same program for each day of the
week, it is reasonable to choose all days of the week simultaneously (by
selecting
MON
TUE WED THU FRI SAT SUN
together), this way there is no
need to perform separate programming of the days. After selecting the
desired day(s), press the “
PROG
” button.
d. At this point the temperature of switch
PROG
should be set, which is
indicated on the display of the device by flashing the temperature value
to be set (
°C
by default). Set the desired temperature using the large
and
buttons, then press the “
PROG
” button.
e. Then,
the start time of switch
PROG
should be adjusted
, which is
indicated on the display of the device by flashing the time value to be
adjusted (
by default). Set the desired time using the large
and
buttons, then press the “
PROG
” button.
f. Following this, the temperature of switch
PROG
should be set, which is
indicated on the display of the device by flashing the temperature value to
be set (
°C
by default). Set this temperature level of switch
PROG
using
the large
and
buttons, then press the “
PROG
” button.
g. The next step in programming is the adjustment of the start time of
switch
PROG
, which is indicated on the display of the device by flashing
the time value to be adjusted (
by default). The adjustment process
of switches
PROG
‒
PROG
can be done (the same way as switch
PROG
is adjusted) by repeating the “
e
”-“
f
” steps.
- 9 -
program
number
Temperature
