CHAPTER 2
QUICK START
2.1 Install the SIM card and temperature sensor
• Turn the power switch to “
OFF
” position.
• Insert SIM card into SIM bay and push it gently inside
until you hear/feel a click, so it becomes locked inside
bay.(To remove SIM from the socket, gently push the
SIM inside the bay until you hear/feel a click again, card
will become unlocked and now pull it out of the bay.)
• Insert the temperature sensor into the temperature
port until it is seized.
2.2 GSM Power on/off
Power on:
1. Turn the power switch to “On” position (
see 7 on
Figure 1
)
2. Plug the
GSM158
into AC power socket.
The “
Green
” power light will illuminate and the
“
Blue
” GSM light will flash for about 20 seconds
before staying on constantly to confirm GSM sig
-
nal available. A long “
beep
” tone can be heard (if
“
beep
” warning tone is enabled).
3. Insert your electronic appliance into the
GSM158
electrical outlet (
see 4 on figure 1
).
INDICATOR
ACTION
Turning off
Turning off
Constant light
No power supply input
Not installed SIM card, invalid SIM card or
the power switch of socket is "OFF"
Has power supply input
STATUS
Power light (Green)
Flash
Turning off
Several times
Long Beep
Constant light
Constant light
Be busy or searching GSM network
The socket outlet cuts power supply
Alarm warning
The socket is successfully reset to its settings
Successfully connected to the GSM network
The socket outlet has power supply
"Beep" warning tone
(Default turning on)
Output light (Red)
GSM light (Blue)
- 7 -
