Rev.01 03-27-17
Page 62 of 67
Compu-Aire
12.1.3
Changing Passwords
Default passwords are defined by the factory. See Entering a password for more detail.
Adjustment to the default password is sometime required by the end user. Password is
protected and not retrievable. Changes to the default password must be stored in a safe place.
The factory cannot retrieve the lost or forgotten password.
Menu->Settings->Pwd change
Figure 44. Password management
User:
Access to status and setpoints
Service:
Access to technician menu
Manufact:
Access to factory settings
Web access:
Access to web based interface
12.2
Factory Reset
Factory reset is used to reset the controller to its default setting. Not all default settings are
applicable to all units.
Warning:
Do not perform this function. It will wipe out all the default settings and return the
controller settings back to its default values. A reconfiguration is required to set it back to its
specifications.
Menu->Setting->Initialization
Figure 45. Factory reset
