ComproPVR User's Guide
50
If you are using an
external
audio patch cable, verify
that it is connected between the Audio-Out of TV tuner
card and Line-In of your sound card and that you
selected the audio source to be “Line-In.” If using the
internal
audio patch cable, check that it is connected
between the internal Audio-Out of the TV tuner card and
AUX-IN of your sound card and that you selected the
audio source to “AUX.”
If you are using VideoMate Live or VideoMate For You,
make sure you select the audio source to “Wave.”
Please refer to your hardware installation guides for
more information.
No audio on the recorded file
This may be a result of choosing the wrong record audio
source in the System Device in ComproPVR Settings.
If you are using an
external
audio patch cable, verify
that it is connected between the Audio-Out of TV tuner
card and Line-In of your sound card and that you
selected the audio source to be “Line-In.” If using the
internal
audio patch cable, check that it is connected
between the internal Audio-Out of the TV tuner card and
AUX-In of your sound card and that you selected the
audio source to “AUX.”
If you are using VideoMate Live or VideoMate For You,
make sure you select the audio source to “Wave.”
Check the
ComproPVR
in the Record tab of Settings
dialog for recording volume levels that is not too low.
[The Recording and Live audio inputs are normally the
same.]
Poor live picture quality while recording
Update your video card drivers. Please visit the support
web site of your video card vendor. If you still have
problems, please install the latest ComproPVR patch
from our website.
