Troubleshooting
49
Make sure there is no other device using the same IRQ
as VideoMate TV card.
If some devices are
sharing
the same IRQ, remove the
other PCI devices and move the TV tuner card to the
fourth PCI slot away from the AGP slot, if possible.
Then reinstall the TV card drivers. This usually solves
the problem.
Try running ComproPVR again.
If the problem
persists
, move the PCI TV Tuner card to
another PCI slot. Make sure the PCI TV card is using an
independent IRQ by checking Windows Device
Manager.
After you can
successfully
use ComproPVR, install the
other PCI devices one at a time. Restart your system
and test ComproPVR after installing each card.
Note
Networking, sound, and SCSI cards need IRQs.If they
use the same IRQ, you may encounter a similar
problem.
Audio OK / No Video
The main reason for this
problem
usually is the result of
an IRQ conflict. Please see
Error Code: 0x1000006
,
above, to solve it.
Video OK / No Audio
If you can
view
the TV picture but get no audio, you
should check the following:
Check the
Windows
Volume Control dialog for muted
sound or volume levels that are too low. (Double-click on
the speaker icon in the system tray to see the Volume
Control dialog.)
