Rotary Screw Compressor Installation Sheet
Date of Installation _______________________________
Compressor Model# ___________________________________
Installation Company _____________________________
Compressor Serial # _________________________ __________
Installation Technician ____________________________
Compressor Voltage _________________________ __________
Site Electrical Phase ______________________________
Site Voltage L1 _______ L2 _______ L3 _______
Compressor Electrical breaker size ___________________
Incoming Voltage at motor start up L1 _______ L2 _______ L3 _______
Incoming Voltage at max operating pressure L1 _______ L2 _______ L3 _______
Incoming power connected to Magnetic Starter _______
Breaker size for the compressor ________________AMPS
Wire size for the compressor _____________________ _______
Distance from main electric panel ___________________
Disconnect installed at the compressors site ________ _______
If Duplex compressor separate disconnects for each drive motor:
N
Yes
N
No
Compressor Rotation Correct
N
Yes
N
No
Motor amps at Max operating Pressure L1 _______ L2 _______ L3 _______
Compressor Max Operating Pressure ________________
Compressor tank drain functional ________________________
Unit inspected for Air leaks ________________________
Unit inspected for oil leaks ______________________________
Unit location:
N
Indoors
N
Outdoors
Unit tank fill time 0-125psi ________________________ (Put N/A if pressure not applicable to installed unit)
Unit tank fill time 0-150psi ________________________
(Put N/A if pressure not applicable to installed unit)
Unit tank fill time 0-175psi ________________________
(Put N/A if pressure not applicable to installed unit)
Unit Cooling Fan
N
Pulls air through cooler
N
Push's air through cooler)
Compressor Temperature switch reading (Before install) _________ (After install) _______
Unit unloads at max operating pressure and begins to release sump pressure _______-
Belt tension checked:
N
Yes
N
No Vibration Pads properly installed:
N
Yes
N
No
All installation steps completed:
N
Yes
N
No If no, reason: ___________________________________________________
_________________________________________________________________________________________________________
Send copy of completed installation sheet to manufacture to begin warranty
Compressed Air Systems, LLC
2626 Skyway Drive
Grand Prairie, TX, 75052
Compressed Air Systems, LLC 1-800-531-9656 Fax 972-352-6364 www.compressed-air-systems.com
5-15 HP Electric Rotary Screw Compressors