Compliance West MegaPulse 2x10s-2.5, Instruction Manual

Page: 15 / 32

11
Table 3. Control, Indicators, Connectors – MegaPulse series Rear Panel
ITEM NO. NAME FUNCTION
1 Appliance Inlet / Fuse holder /
Power Switch Use supplied cordset to connect Tester to appropriate source of supply. Fuse holder provides access for
Fuse replacement, and the Power Switch is used to turn the tester ON and OFF.
2 Fuse replacement warning /
Rating of supply
Specifies replacement fuse and required supply voltage.
3 Directions Provides directions for Tester operation to test personnel.
4 Voltage Adjust Used to adjust the High Voltage output (as an alternative to the front panel Voltage Adjust knob). Turn
Clockwise to increase the output voltage after the
CHARGE button has been pressed. Turn the
adjustment fully counterclockwise (lowest voltage setting) before the start of each test, and after the end
of each test.