6
* Legend: A x B/C x D A= Voltage rise time B= Voltage duration C= Current rise time D= Current duration
Voltage rise time (A) is defined as follows (per ANSI/IEEE C62.41 and other standards): trise = 1.67(t
90
- t
30
), where t
90
and t
30
= the times of the 90% and 30% amplitude points on the leading edge of the waveform.
Voltage duration (B) is defined (per ANSI/IEEE C62.41 and other standards) as the time between virtual origin and the time of the 50% pint on the tail. The virtual origin is the point where a straight line between the 30% and 90% points on the leading edge of the
waveform intersects the V = 0 line.
Current rise time (C) is defined as follows (per ANSI/IEEE C62.41 and other standards): trise = 1.25(t
90
- t
10
), where t
90
and t
10
= the times of the 90% and 10% amplitude points on the leading edge of the waveform.
Current duration (D) is defined (per ANSI/IEEE C62.41 and other standards) as the time between virtual origin and the time of the 50% pint on the tail. The virtual origin is the point where a straight line between the 10% and 90% points on the leading edge of the
waveform intersects the I = 0 line.
∂
Indicates Models using Compliance West USA IEC 65 Switch.
Note 1: 32 uF capacitor in series with a 500uH inductor having a DC resistance no greater than 10 Ohms.
Common specifications:
Meter Accuracy:
2500V output versions: +20 V
5000V, 7000V versions: +40 V
All models: better than 1% of full-
scale reading
Environmental:
15-40°C operating temperature
0-90% Relative Humidity, non-
condensing
Electrical:
Input Voltage: 120 V, 50-60 Hz
Input Current: 1 -7 A (model
specific)
Mechanical:
Weight: Approx. 16-85 lbs.
Dimensions: 11.25”W x 12”D x 5”H
To 24”W x 20”D x 36”H
Table 1. MegaPulse series specifications
Model Waveform*
Max.
Voltage
C1 R1 R2 C2 R3
10x700-2.5
10 x 700/6 x 300 uS
2500V
20 uF
50 Ohms
15 Ohms
0.2 uF
25 Ohms
10x700-7
10 x 700/6 x 300 uS
7000V
20 uF
50 Ohms
15 Ohms
0.2 uF
25 Ohms
1.2x50-2.5
1.2 x 50/1 x 20 uS
2500V
1 uF
76 Ohms
13 Ohms
0.033 uF
25 Ohms
1.2x50-7
1.2 x 50/1 x 20 uS
7000V
1 uF
76 Ohms
13 Ohms
0.033 uF
25 Ohms
1.2x50-12 12
Ω
Fast Charge
∂
1.2 x 50/1 x 20uS
12300V
2.75 uF
40 Ohms
7 Ohms
0.05uF
0 Ohms
1.2x50-12.3-1
1.2x50uSec 500 ohms
12,300
0.5uF
147 Ohms
328 Ohms
1 nF
253 Ohms
10x1000s-1
10 x 1000/10 x 1000 uS
1000V
10x360s-1
10 x 360/10 x0360 uS
1000V
2x10s-2.5
2 x 10/2 x 10uS
2500V
Defib-5
20 x 2200/50 x 800 uS
5000V
32 uF (1)
100 Ohms
50 Ohms
None (open)
0 Ohms
Antenna Surge
Not defined
10000V
1 nF
-
1 kOhm
-
-
AXVI1-2.5, -7
1.2 x 50/0 x 7 uS
2500V, 7000V
0.25 uF
234 Ohms
62 Ohms
7800 pF
0 Ohms
AXVI2-2.5, -7
1.2 x 50/0 x 7 uS
2500V, 7000V
0.25 uF
234 Ohms
45 Ohms
7800 pF
0 Ohms
AXVI3-2.5, -7
.7 x 40/0 x 4 uS
2500V, 7000V
0.25 uF
234 Ohms
27 Ohms
7800 pF
0 Ohms
AXVI4-2.5, -7
0 x 40/0 x 4 uS
2500V, 7000V
0.25 uF
234 Ohms
27 Ohms
None (open)
0 Ohms
AXVI5-2.5, -7
0 x 40/4 x 40 uS
2500V, 7000V
20 uF
3 Ohms
25 Ohms
3300 pF
0 Ohms
AXVI6-2.5, -7
.2 x 40/ 0 x 35 uS
2500V, 7000V
20 uF
3 Ohms
13 Ohms
3300 pF
0 Ohms
AXVI7-2.5, -7
.2 x 40/0 x 30 uS
2500V, 7000V
20 uF
3 Ohms
9 Ohms
3300 pF
0 Ohms
AXVI8-2.5, -7
.2 x 40/0 x 30 uS
2500V, 7000V
20 uF
3 Ohms
7 Ohms
3300 pF
0 Ohms
AXVI9-2.5, -7
.1 x 40/0 x 25 uS
2500V, 7000V
20 uF
3 Ohms
5 Ohms
3300 pF
0 Ohms
AXVI10-2.5, -7
.08 x 40/0 x 20 uS
2500V, 7000V
20 uF
3 Ohms
3 Ohms
3300 pF
0 Ohms
Summary of Contents for MegaPulse 2x10s-2.5
