Compliance West HTT-1R, Instruction Manual

Page: 7 / 17

2
Section 2
Introduction and Specifications
Introduction
This manual contains complete operating, maintenance and calibration instructions for the Compliance
West USA Model HTT-1R Function Tester.
The instrument is a portable function tester used to verify proper operation of hipot and ground
continuity testers. The HTT-1R is intended to be used as a calibration verification tool.
The HTT-1R is warranted for a period of one year upon shipment to the original purchaser.
Specifications
Specifications for the HTT-1R are listed in the following table:
Table 1: Specifications of the HTT-1R
*Note: Switch contacts resistance and connectors can add up to 0.03 to the total resistance.
For customized values see product label.
Maximum current capability of GROUND test circuit: 30 Amps
Ground Test time should be 3 seconds Max and rest 10 s for currents above 10A
Setting of PASS for Ground Circuit:
0.025 ohm resistor *
Setting of FAIL for Ground Circuit: 0.1 ohm resistor *
Option LomA
Setting of PASS for Leakage Current:
4.232M Ω, 4 .96mA at 2100V
Setting of FAIL for Leakage Current: 2.088M Ω , 1mA at 2100V
Option MedmA
Setting of PASS for Leakage Current:
848k Ω, 2.48mA at 2100V
Setting of FAIL for Leakage Current: 424k Ω, 5mA at 2100V
Option HimA
Setting of PASS for Leakage Current:
424k Ω, 4.95mA at 2100V
Setting of FAIL for Leakage Current: 200k Ω, 10.5mA at 2100V
Option ExmA
Setting of PASS for Leakage Current:
220k Ω, 9.54mA at 2100V
Setting of FAIL for Leakage Current: 120k Ω, 17.5mA at 2100V
Maximum voltage capability of HIPOT test circuit: 3000 Vac / 4200Vdc
Setting of PASS for Hipot test: open circuit
Setting of FAIL for Hipot test: arc-over at 750 V+400Vac /
1050+560Vdc