20
21
E: START A STIMULATION PROGRAM
After selected the desired level or electrode placement (if level option in setting is off), the next
interface is the stimulation interface, refer to below picture. Take program “Endurance1” as an
example, follow below steps:
At this point, four LEDs under channel buttons and LEDs around the central confirmation button
would be on and blink. Four small arrows icon “ “ will display and flash on the screen which
indicate you shall select one or other certain corresponding channels. The buttons would act as
above picture showing.
After user selected certain channel, the corresponding LED would stop blink and kept on, the
arrow would become to a semicircle icon “ “ , that means the corresponding channel is selected.
Of course, user can select up to four channels at a time, see below picture.
A.
Select desired level
B.
Confirm your selection
C.
Return to previous step
B
A
A
A
A
1: SELECT THE CHANNEL
After user choose the desired channel, press “the central confirmation button” to confirm
your selections then follow the tips on screen “press up to start” to press the UP key to start a
stimulation session, the intensity will be added from 0. Refer to below pictures.
Note if certain channel was not selected during in previous step, the corresponding button would not
act to “Activate / inactivate” the channel state. Above picture shows four channel are all activated.
1. Warm up phase
2. Work ramp up phase
3. Work steady phase
4. Work ramp down phase
5. Relax ramp up phase
6. Relax phase
7. Relax ramp down phase
8. Recovery phase
9. Number of work performed / Total number of works
10. Time remained for performing the stimulation session
11. Pop-up help indicating information or actions to be taken
12. Intensity of each channel. Each channel can add the
intensity up to 999. Note that on this screen only
channel 1 is selected.
A.
Start stimulation
B.
Return to the previous step
C.
Activate/inactivate the
corresponding channel
A.
Increase the intensity
B.
Decrease the intensity
C.
Pause/resume
D.
Activate/inactivate
channel state
B
A
A
A
A
2: START STIMULATION
3: DURING STIMULATION
4: DESCRIPTION ABOUT STIMULATION SCREEN
C
D
A
B
